- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
welding sockolet, 3000 lbsSWOL
welding sockolet, 3000 lbs high pressure-fitting ASME B 16.11, ASTM-A 182
General
These fittings are not standardised and are manufactured in accordance
with the recommendations of the ASME B 31.3. code
Material
ASTM A 105 - A 350 - A 182 - A694; manufactured by forging
Range
Class 3000 : 1/8” to 4” / Class 6000 :1/2” to 2”
Description
This type of fittings is installed either straight or at an angle to the main pipe.
As the bearing surface fits the shape of the pipe exactly, the outside diameter
of the pipe must be known. Range : NPS 3/8" to 60". The main pipe and the
fittings are connected by means of a fillet weld.
The fitting and the branch pipe can be connected in several different ways.
Outlet radius of branch fittings have been unified in order to allow, generally
speaking up to size 4", the use of same fitting on different run pipe sizes, with
a maximum gap of 1/32" (0,8 mm) between the top of the run pipe and the base
of the fitting. For outlet sizes over 4", usually a specific radius is required for each
run size. Each fitting is marked with its nominal size (outlet diameter) and the
range of run sizes on which it can be welded.
extended product description
Stainless steel ANSI / ASME socket welding fittings sockolets
welding sockolet, 3000 lbsSWOL
General
These fittings are not standardised and are manufactured in accordance
with the recommendations of the ASME B 31.3. code
Material
ASTM A 105 - A 350 - A 182 - A694; manufactured by forging
Range
Class 3000 : 1/8” to 4” / Class 6000 :1/2” to 2”
Description
This type of fittings is installed either straight or at an angle to the main pipe.
As the bearing surface fits the shape of the pipe exactly, the outside diameter
of the pipe must be known. Range : NPS 3/8" to 60". The main pipe and the
fittings are connected by means of a fillet weld.
The fitting and the branch pipe can be connected in several different ways.
Outlet radius of branch fittings have been unified in order to allow, generally
speaking up to size 4", the use of same fitting on different run pipe sizes, with
a maximum gap of 1/32" (0,8 mm) between the top of the run pipe and the base
of the fitting. For outlet sizes over 4", usually a specific radius is required for each
run size. Each fitting is marked with its nominal size (outlet diameter) and the
range of run sizes on which it can be welded.
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.