- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
ball valve F/F, 3-pieceK3IS
ball valve F/F, 3-piece inductive double sensor used as position feedback installed on SS mounting kit
Technical data of the valve
Designation | Properties Type: K3 | Properties Type: K3-PRO |
---|---|---|
Housing | Stainless steel 1.4408 (CF8M) | Stainless steel 1.4408 (CF8M) |
Ball | Stainless steel 1.4408 (CF8M) | Stainless steek 1.4408 (CF8M) |
Ball seal | PTFE | RTFE |
Shaft seal | PTFE | Peek - Viton - PTFE |
Pressure range | PN 63 | PN 63 |
ISO-Top 5211 | not direct actuator mounting | direct actuator mounting |
>> further information
Please refer to all other information in the section Industrial Fittings
Position sensor
> The inductive double sensor was designed in accordance with the EC Machinery Directive
RL 89/392 / EEC examined by the TÜV.
> Switching states, supply voltage and valve control are indicated by LEDs.
General data
Designation | Properties |
---|---|
Switching element function | PNP Dual closer |
Switching distance | 3 mm |
Assembly | flush mountable |
Output polarity | DC |
Series | cuboid |
Assured switching distance | 0...2,43mm |
Reduction factor rAL | 0,5 |
Reduction factor rCU | 0,4 |
Reduction factor rV2A 1.4301 | 1 |
Reduction factor rST37 | 1,2 |
Specifications
Designation | Properties |
---|---|
Operating voltage | 10...30 V DC |
Switching frequency | 0...500Hz |
Hysteresis | typ. 5% |
Reverse polarity protection | all lines |
Short circuit protection | clocked |
Voltage drop | <= 3 V |
Operating current | 0...100mA |
Residual current | 0...0,5mA typ. 0,1 MYA for 25°C |
No-load current | <= 25mA |
Operating voltage display | LED, green |
Switching status display | LED, yellow |
Mechanical data
Designation | Properties |
---|---|
Connection (system side)* | PVC-cable 5 m |
Housing material | PBT |
Front surface | PBT |
Type of protection | IP67 |
Actuator for series F31
The actuator is made of a conductive plastic material, avoids static charges and allows
use in hazardous areas.
(*) = optional plug connection (V1, V16, V18), terminal block
Please refer to all other information in the section position sensor
installed on SS mounting kit
extended product description
Stainless steel ball valves threaded ends inductive sensors
ball valve F/F, 3-pieceK3IS
Technical data of the valve
Designation | Properties Type: K3 | Properties Type: K3-PRO |
---|---|---|
Housing | Stainless steel 1.4408 (CF8M) | Stainless steel 1.4408 (CF8M) |
Ball | Stainless steel 1.4408 (CF8M) | Stainless steek 1.4408 (CF8M) |
Ball seal | PTFE | RTFE |
Shaft seal | PTFE | Peek - Viton - PTFE |
Pressure range | PN 63 | PN 63 |
ISO-Top 5211 | not direct actuator mounting | direct actuator mounting |
>> further information
Please refer to all other information in the section Industrial Fittings
Position sensor
> The inductive double sensor was designed in accordance with the EC Machinery Directive
RL 89/392 / EEC examined by the TÜV.
> Switching states, supply voltage and valve control are indicated by LEDs.
General data
Designation | Properties |
---|---|
Switching element function | PNP Dual closer |
Switching distance | 3 mm |
Assembly | flush mountable |
Output polarity | DC |
Series | cuboid |
Assured switching distance | 0...2,43mm |
Reduction factor rAL | 0,5 |
Reduction factor rCU | 0,4 |
Reduction factor rV2A 1.4301 | 1 |
Reduction factor rST37 | 1,2 |
Specifications
Designation | Properties |
---|---|
Operating voltage | 10...30 V DC |
Switching frequency | 0...500Hz |
Hysteresis | typ. 5% |
Reverse polarity protection | all lines |
Short circuit protection | clocked |
Voltage drop | <= 3 V |
Operating current | 0...100mA |
Residual current | 0...0,5mA typ. 0,1 MYA for 25°C |
No-load current | <= 25mA |
Operating voltage display | LED, green |
Switching status display | LED, yellow |
Mechanical data
Designation | Properties |
---|---|
Connection (system side)* | PVC-cable 5 m |
Housing material | PBT |
Front surface | PBT |
Type of protection | IP67 |
Actuator for series F31
The actuator is made of a conductive plastic material, avoids static charges and allows
use in hazardous areas.
(*) = optional plug connection (V1, V16, V18), terminal block
Please refer to all other information in the section position sensor
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.