- stocks and pricing
you'll return to the table view.
plate flanges PN 10
acc. DIN 2576/ EN 1092-1 type 01
extended product description
Flange dimensions PN 10
DN | Standard* | D | k | No.** | ØL | b |
|---|---|---|---|---|---|---|
25 | DIN | 115 | 85 | 4 | 14 | 16 |
32 | DIN | 140 | 100 | 4 | 18 | 16 |
40 | DIN | 150 | 110 | 4 | 18 | 16 |
50 | DIN | 165 | 125 | 4 | 18 | 18 |
65 | DIN | 185 | 145 | 4 | 18 | 18 |
65 | EN | 185 | 145 | 8 | 18 | 18 |
80 | DIN/ EN16 | 200 | 160 | 8 | 18 | 20 |
100 | DIN | 220 | 180 | 8 | 18 | 20 |
100 | EN | 220 | 180 | 8 | 18 | 22 |
125 | DIN/ EN16 | 250 | 210 | 8 | 18 | 22 |
150 | DIN | 285 | 240 | 8 | 22 | 22 |
150 | EN | 285 | 240 | 8 | 22 | 24 |
200 | DIN/ EN10 | 340 | 295 | 8 | 22 | 24 |
250 | DIN/ EN10 | 395 | 350 | 8 | 22 | 26 |
300 | DIN/ EN10 | 445 | 400 | 12 | 22 | 26 |
350 | DIN/ EN | 505 | 460 | 16 | 26 | 28 |
400 | DIN/ EN | 565 | 515 | 16 | 26 | 32 |
500 | DIN/ EN | 670 | 620 | 20 | 26 | 38 |
Dimensions in mm
(*) DIN = DIN 2576 PN 10; EN = EN 1092-1 PN 16;
(*) DIN/ EN16 = DIN 2576 PN 10 & EN 1092-1 PN 16; DIN/ EN10 = DIN 2576 PN 10 & EN 1092-1 PN 10
(**) Number of drill holes
FR-Piece |
|---|
stainless steel standard part of pipes |
consisting of a concentric reducer and two flat flanges |
welder under inert gas |
pickled and passivated in dipping bath |
design for nominal pressure PN 10 |
dimensions range DN 15 bis DN 1000 |
Type of design | Standard version | optionally |
|---|---|---|
Flange | smooth | welded-on, loose+collars |
Flange | DIN | EN 1092-1 |
Flange | pressure level PN 10 | PN 6, 16, 25, 40 |
Flange | full sheet thickness | reduced sheet thickness |
Reducer | concentric | excentric |
Reducer | welded EN 10253-3 | seamless EN 10253-4 |
Wall thickness | 2,0 - 4,0 | acc. to specification |
Mounting length | gem. EN 10253 | acc. to specification |
Material | V4A | V2A |
