



- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls

gasket for flangeE9566



gasket for flange DIN 2690/ EN 1514-1 type IBC
EPDM, black, high-grade
ethylene propylene diene rubber
Elastomer with a good weathering and ozone resistance, together with an excellent price-
performance ratio, sulphur-cured. Conform with diverse automotive standards, e.g. EW 2.8.1 G70.
SEMPERIT | E 9566 |
---|---|
hardness | 70 +/-5 [Shore A] |
density | ca. 1,3 [g/cm3] |
tensile strength | 7 [N/mm2] |
elongation at break | 250 [%] |
oil resistance | not resistant |
gasoline resistance | not resitant |
acid resistance | resistant |
strong bases | well resistant |
wear resistance | partially suitable |
Operating temperature range
medium | dyn. (stat.) | max. | temporarily |
---|---|---|---|
air | (—40) °C | +100 °C | +120 °C |
Compression set DIN ISO 815
Length | Temperature | DVR |
---|---|---|
22 h | 70 °C | 35 % |
aging DIN 53508
Conditions | Hardness | Stability | Elongation |
---|---|---|---|
70 h/100 °C | +10 Shore A | —10 % | —25 % |
Ozone resistance
Length | pphm ozone | Temperature | crack level |
---|---|---|---|
48 h | 200 pphm | 40 °C | 0 |
extended product description
other gaskets elastomer EPDM Shore 70
gasket for flangeE9566

EPDM, black, high-grade
ethylene propylene diene rubber
Elastomer with a good weathering and ozone resistance, together with an excellent price-
performance ratio, sulphur-cured. Conform with diverse automotive standards, e.g. EW 2.8.1 G70.
SEMPERIT | E 9566 |
---|---|
hardness | 70 +/-5 [Shore A] |
density | ca. 1,3 [g/cm3] |
tensile strength | 7 [N/mm2] |
elongation at break | 250 [%] |
oil resistance | not resistant |
gasoline resistance | not resitant |
acid resistance | resistant |
strong bases | well resistant |
wear resistance | partially suitable |
Operating temperature range
medium | dyn. (stat.) | max. | temporarily |
---|---|---|---|
air | (—40) °C | +100 °C | +120 °C |
Compression set DIN ISO 815
Length | Temperature | DVR |
---|---|---|
22 h | 70 °C | 35 % |
aging DIN 53508
Conditions | Hardness | Stability | Elongation |
---|---|---|---|
70 h/100 °C | +10 Shore A | —10 % | —25 % |
Ozone resistance
Length | pphm ozone | Temperature | crack level |
---|---|---|---|
48 h | 200 pphm | 40 °C | 0 |
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.