- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
positioner DPS 2005EA.DPS
positioner DPS 2005 class B+C acc. E DIN EN > 15714 inching + modulation > 0-10V or 4-20 mA
> volt-free position feedback > integrated in actuator housing (Please notice the operating manual!)
Connection
The standard circuit diagram (Fig. 5/7) contains a 3-wire connection for AC and DC.
A 2 wire DC connection (Fig. 6/7) is also possible as an alternative.
DPS positioning system
The positioning system converts the electric actuators to servo-controlled valve controllers.
Using the input signal, it is possible to position the actuator anywhere in the swivel range.
The current position of the valve can be determined from the output signal.
The DPS module controls the analog input and output signal (4-20mA or 0-10V) using an
integrated digital microprocessor (CPU) and compares it to the actuator position.
Sensitivity and positioning repeatability are guaranteed through the continuous comparison of the
analog input signals by the CPU.
Technical data
| Designation | Value |
|---|---|
| Input signal | 0-10V or 4-20mA |
| Output signal | 0-10V or 4-20mA |
| Accuracy | 0,3% |
| Linearity | 2% |
| Hysteresis | 2% |
| Division | 70 Steps |
> 0-10V or 4-20 mA
> volt-free position feedback
> integrated in actuator housing
(Please notice the operating manual!)
extended product description
ball valves with actuator electric actuator accessories positioning system
positioner DPS 2005EA.DPS
> integrated in actuator housing
(Please notice the operating manual!)
Connection
The standard circuit diagram (Fig. 5/7) contains a 3-wire connection for AC and DC.
A 2 wire DC connection (Fig. 6/7) is also possible as an alternative.
DPS positioning system
The positioning system converts the electric actuators to servo-controlled valve controllers.
Using the input signal, it is possible to position the actuator anywhere in the swivel range.
The current position of the valve can be determined from the output signal.
The DPS module controls the analog input and output signal (4-20mA or 0-10V) using an
integrated digital microprocessor (CPU) and compares it to the actuator position.
Sensitivity and positioning repeatability are guaranteed through the continuous comparison of the
analog input signals by the CPU.
Technical data
| Designation | Value |
|---|---|
| Input signal | 0-10V or 4-20mA |
| Output signal | 0-10V or 4-20mA |
| Accuracy | 0,3% |
| Linearity | 2% |
| Hysteresis | 2% |
| Division | 70 Steps |
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.