- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
flange adapter, PN 10TKFL
flange adapter, PN 10
Application
Teekay Flange Adaptors make the installation of pumps and valves quicker an easier.
Simply bolt the flange adaptor on to the existing flange and fasten the coupling over the
join between the flange adaptors and plain end pipe. This creates a useful maintenance
point in the future. Undo the bolts on the coupling rather than the nuts on the flange
adaptors and lift out the piece of equipment!
Tekay Flange Adaptors can be fabricated to any pipe O.D. 48,3 - 2000 mm / DIN/EN, and
are available in standart and non- standart drillings.
Choose an Axiflex coupling to accommodate expansion and contraction or an Axilock for fully
anchored solution.
Depending on diameter ande pressure!
Material Selection
Type | Casing | Coated | Fasteners |
---|---|---|---|
Type I | AISI 304/ 1.4301 | - | Alloy steel, PTFE coated |
Type II | AISI 304/ 1.4301 | - | AISI 316/ 316L |
Type IV | AISI 316L/ 1.4404 | - | AISI 316/ 316L |
Type V | High strength steel | Rilsan/ PVC/ Epoxy | Alloy steel, PTFE coated |
Type VI | High strength steel | Rilsan/ PVC/ Epoxy | AISI 316/ 316L |
Temperature
Gasket | Temperature |
---|---|
EPDM | -20°C to +100°C |
NBR | -20°C to +80°C |
HNBR | -20°C to +150°C |
FKM | -20°C to +180°C |
Stainless steel TEEKAY installation adapters flange adapters
flange adapter, PN 10TKFL
Application
Teekay Flange Adaptors make the installation of pumps and valves quicker an easier.
Simply bolt the flange adaptor on to the existing flange and fasten the coupling over the
join between the flange adaptors and plain end pipe. This creates a useful maintenance
point in the future. Undo the bolts on the coupling rather than the nuts on the flange
adaptors and lift out the piece of equipment!
Tekay Flange Adaptors can be fabricated to any pipe O.D. 48,3 - 2000 mm / DIN/EN, and
are available in standart and non- standart drillings.
Choose an Axiflex coupling to accommodate expansion and contraction or an Axilock for fully
anchored solution.
Depending on diameter ande pressure!
Material Selection
Type | Casing | Coated | Fasteners |
---|---|---|---|
Type I | AISI 304/ 1.4301 | - | Alloy steel, PTFE coated |
Type II | AISI 304/ 1.4301 | - | AISI 316/ 316L |
Type IV | AISI 316L/ 1.4404 | - | AISI 316/ 316L |
Type V | High strength steel | Rilsan/ PVC/ Epoxy | Alloy steel, PTFE coated |
Type VI | High strength steel | Rilsan/ PVC/ Epoxy | AISI 316/ 316L |
Temperature
Gasket | Temperature |
---|---|
EPDM | -20°C to +100°C |
NBR | -20°C to +80°C |
HNBR | -20°C to +150°C |
FKM | -20°C to +180°C |
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.