Internet Explorer Warning
Please note: heco gmbh will discontinue support for Internet Explorer in early 2021.
We recommend Microsoft Edge , which is already installed on Windows 10, also Google Chrome or Mozilla Firefox.
deencz
Diesen Artikel aus der Anfrageliste entfernen?
Ja
Nein
Ok
Ok
technical design
Hint
By clicking on this bar you'll return to the table view.
Don't show this hint again!
measures and values
development of stocks
request list
associated articles
installation

Before installation:


> Clean and deburr the pipes (remove all residual materials like rust or paint, for example)


> Damage to the ends of the pipe absolutely must be eliminated


> For locked couplings, is the optimal distance between the ends of the pipes is 3-8 mm.

> For unlocked couplings, the distance depends on the width of the coupling

> as well as on use of a vacuum ring



Mark


Measure a distance equal to half of the pipe coupling and subtract 2.5 mm.

Mark the ends of the pipe at the distance calculated. This ensures that the ends of the pipe

do not come into contact with each other and that the coupling is centered over the ends of the pipe

after installation.



Align


Push on the pipe coupling and align it on the markings.

downloads
videos
Ask our experts

Stainless steel TEEKAY installation installation guide installation

installation

Before installation:


> Clean and deburr the pipes (remove all residual materials like rust or paint, for example)


> Damage to the ends of the pipe absolutely must be eliminated


> For locked couplings, is the optimal distance between the ends of the pipes is 3-8 mm.

> For unlocked couplings, the distance depends on the width of the coupling

> as well as on use of a vacuum ring



Mark


Measure a distance equal to half of the pipe coupling and subtract 2.5 mm.

Mark the ends of the pipe at the distance calculated. This ensures that the ends of the pipe

do not come into contact with each other and that the coupling is centered over the ends of the pipe

after installation.



Align


Push on the pipe coupling and align it on the markings.

downloads
Ask our experts