- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
Plastlock pipe couplingTAPL
Plastlock pipe coupling TEEKAY for plastic pipes - axially restrained -
Teekay Plastlock
The patented PLASTLOCK-Pipe Couplings makes it possible to connect synthetic materials easily.
The Pipe-couplings have a dynamic axial anchor-system to prevent the separation of the pipes.
The Sticking, welding, flanging and the use of Pipe-connecting parts is not needed, as far as the
SDR-Ratio (Standard-Dimension-Ratio) is adhered to.
As Synthetic materials, due to their nature, normally move around when pressure is applied to them
the anchor mechanism of the PLASTLOCK-Pipe coupling has three individual grades of anchoring.
These hold the synthetic pipes together due to the consistent connection oft he anchor-rings with
the surface of the pipes.
Each anchor ring has a own chamber in which the material of the Pipe can enter as soon as the
anchor ring touches the surface. The form of the anchor rings make it possible to absorb the
material oft he pipes, instead of only cutting into them.
Through the absorption oft he Materials inside oft he anchoring mechanism the Pipe-coupling gives
these a very solid connection.
As the pressure from outside of the tube or on the inside of the tube rises, the tensile strength of
the connection also rises because of the design oft he interlocking connection.
Dimension range
The listed dimensions correspond only to the most common dimensions.
Couplings with other diameters can also be made.
Material selection
| Version | Housing | Seal |
|---|---|---|
| Type I | AISI 304/ 1.4301 | Carbon steel, PTFE coated |
| Type II | AISI 304/ 1.4301 | AISI 316/ 316L |
| Type IV | AISI 316L/ 1.4404 | AISI 316/ 316L |
Temperature Range
| Sealing Material | Temperature Range |
|---|---|
| EPDM | -40°C to +100°C |
| NBR | -20°C to +80°C |
| HNBR | -20°C to +150°C |
| FKM | -20°C to +180°C |
Suitability
| Materials |
|---|
| Polyethylene |
| Polibutylene |
| PVC-C |
| PVC-U |
| ABS |
| Polypropylene |
- axially restrained -
extended product description
TEEKAY Plastlock for plastic pipes
Plastlock pipe couplingTAPL
Teekay Plastlock
The patented PLASTLOCK-Pipe Couplings makes it possible to connect synthetic materials easily.
The Pipe-couplings have a dynamic axial anchor-system to prevent the separation of the pipes.
The Sticking, welding, flanging and the use of Pipe-connecting parts is not needed, as far as the
SDR-Ratio (Standard-Dimension-Ratio) is adhered to.
As Synthetic materials, due to their nature, normally move around when pressure is applied to them
the anchor mechanism of the PLASTLOCK-Pipe coupling has three individual grades of anchoring.
These hold the synthetic pipes together due to the consistent connection oft he anchor-rings with
the surface of the pipes.
Each anchor ring has a own chamber in which the material of the Pipe can enter as soon as the
anchor ring touches the surface. The form of the anchor rings make it possible to absorb the
material oft he pipes, instead of only cutting into them.
Through the absorption oft he Materials inside oft he anchoring mechanism the Pipe-coupling gives
these a very solid connection.
As the pressure from outside of the tube or on the inside of the tube rises, the tensile strength of
the connection also rises because of the design oft he interlocking connection.
Dimension range
The listed dimensions correspond only to the most common dimensions.
Couplings with other diameters can also be made.
Material selection
| Version | Housing | Seal |
|---|---|---|
| Type I | AISI 304/ 1.4301 | Carbon steel, PTFE coated |
| Type II | AISI 304/ 1.4301 | AISI 316/ 316L |
| Type IV | AISI 316L/ 1.4404 | AISI 316/ 316L |
Temperature Range
| Sealing Material | Temperature Range |
|---|---|
| EPDM | -40°C to +100°C |
| NBR | -20°C to +80°C |
| HNBR | -20°C to +150°C |
| FKM | -20°C to +180°C |
Suitability
| Materials |
|---|
| Polyethylene |
| Polibutylene |
| PVC-C |
| PVC-U |
| ABS |
| Polypropylene |
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.