



- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls

3-piece ball valveVIK3



3-piece ball valve grooved > victaulic system <
Victaulic ball valve
type K3
Specifications |
---|
full bore |
3-piece housing |
with both sides welded pipe socket with groove |
Flange plate acc. to ISO standard for direct actuarors mounting |
handle locking device |
>> further information
You will find further technical information under the industrial valves heading
The system is designed for standard pipes with roller grooves or milled grooves and for thin-walled pipes with roller grooves.
The roller grooves are not produced by removing material. The groove is cold-formed by an upper roller
that is driven into the pipe while being driven by a bottom roller driven into the pipe.
The rolled groove has round edges that reduces the potential motion of the ends of the pipe (due to expansion, contraction,
and bending) to one half of the value specified for a milled groove.
extended product description
Stainless steel Victaulic Standard Nutsystem ball valves 3-piece
3-piece ball valveVIK3

Victaulic ball valve
type K3
Specifications |
---|
full bore |
3-piece housing |
with both sides welded pipe socket with groove |
Flange plate acc. to ISO standard for direct actuarors mounting |
handle locking device |
>> further information
You will find further technical information under the industrial valves heading
The system is designed for standard pipes with roller grooves or milled grooves and for thin-walled pipes with roller grooves.
The roller grooves are not produced by removing material. The groove is cold-formed by an upper roller
that is driven into the pipe while being driven by a bottom roller driven into the pipe.
The rolled groove has round edges that reduces the potential motion of the ends of the pipe (due to expansion, contraction,
and bending) to one half of the value specified for a milled groove.
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.