- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
grooved bend 90°, type 3410
grooved bend 90°, type 3 with leg extension >victaulic system<
90° Pipe elbow, grooved, Design 3 - made of stainless steel
Victaulic No. 10
The system is designed for standard pipes with roller grooves or milled grooves and for
thin-walled pipes with roller grooves.
The roller grooves are not produced by removing material. The groove is cold-formed by
an upper roller that is driven into the pipe while being driven by a bottom roller driven into the pipe.
The rolled groove has round edges that reduces the potential motion of the ends of the pipe
(due to expansion, contraction, and bending) to one half of the value specified for a milled groove.
Constructions, Designation acc. to DIN 2605
Design | Radius |
---|---|
2 | r≈1,0xØA |
3 | r≈1,5xØA |
5 | r≈2,5xØA |
End elongation
OØ | Extension |
---|---|
≤ 168,3 mm | 35 mm |
> 168,3 mm | 40 mm |
"directly ringed " Version on request
extended product description
Stainless steel Victaulic Standard Nutsystem fittings bends r=1.5xD
grooved bend 90°, type 3410
90° Pipe elbow, grooved, Design 3 - made of stainless steel
Victaulic No. 10
The system is designed for standard pipes with roller grooves or milled grooves and for
thin-walled pipes with roller grooves.
The roller grooves are not produced by removing material. The groove is cold-formed by
an upper roller that is driven into the pipe while being driven by a bottom roller driven into the pipe.
The rolled groove has round edges that reduces the potential motion of the ends of the pipe
(due to expansion, contraction, and bending) to one half of the value specified for a milled groove.
Constructions, Designation acc. to DIN 2605
Design | Radius |
---|---|
2 | r≈1,0xØA |
3 | r≈1,5xØA |
5 | r≈2,5xØA |
End elongation
OØ | Extension |
---|---|
≤ 168,3 mm | 35 mm |
> 168,3 mm | 40 mm |
"directly ringed " Version on request
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.