- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
spray ball2000
spray ball
Static spray heads
The static spray balls are proven aids for cleaning tanks and containers.
Static spray heads are used in the low pressure range between 0.5 bar and 3.0 bar.
For stubborn dirt when rotating spray heads or Rotating cleaning heads are not necessary yet,
it is recommended to use a spray ball with a full spraying angle of 360°.
For less stubborn dirt and grime, it is recommended to use a 180° spray head to spray out the
upper part of the tank or container.
The lower part is the cleaned by the cleaning agent draining out.
If there are installations in a tank that require special cleaning, then it is recommended to install
an extra 180° spray head pointed downwards.
It can be placed directly over or under the installations.
Material
Standard: 1.4571 (V4A)
on request: 1.4435; Hasteloy C22, Aloy 59, Teflon
Connection options
Clip On
Socket connection acc. to ISO 228
Recommended mounting depths
DN | Pressure on the head | Mounting depth |
---|---|---|
8 | 0,5 - 1,0 bar | 100 mm |
10 | 0,5 - 1,5 bar | 300 mm |
15 | 0,5 - 1,5 bar | 300 - 400 mm |
20 | 0,5 - 2,0 bar | 500 mm |
25 | 1,0 - 2,5 bar | 500 - 700 mm |
32 | 1,0 - 2,5 bar | 500 - 700 mm |
40 | 1,0 - 2,5 bar | 500 - 700 mm |
50 | 1,5 - 3,0 bar | 600 - 800 mm |
Spray diameter (in meters)
DN | 360° | 180° up | 180° below | 270° |
---|---|---|---|---|
25/0 | 2,0 - 3,0 m | 2,5 - 3,0 m | 2,0 - 3,0 m | 2,0 - 3,0 m |
25/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
32/0 | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m |
32/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
40/0 | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m |
40/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
50/0 | 4,0 - 5,0 m | 4,0 - 4,5 m | 4,0 - 4,5 m | 4,0 - 4,5 m |
50/1 | 6,0 m | 6,0 m | 6,0 m | 6,0 m |
Throughput
Perigon spraying 360°
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 11,0 | 17,3 |
25/1 | 17,5 | 28,1 |
32/0 | 13,5 | 22,0 |
32/1 | 21,7 | 35,5 |
40/0 | 11,8 | 19,2 |
40/1 | 22,8 | 36,8 |
50/0 | 28,6 | 47,1 |
50/1 | 49,1 | 78,7 |
(m3/h)
180° semi-spraying angle upwards
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 8,7 | 12,8 |
25/1 | 14,2 | 23,0 |
32/0 | 9,8 | 15,6 |
32/1 | 16,0 | 26,7 |
40/0 | 9,6 | 14,8 |
40/1 | 14,9 | 24,8 |
50/0 | 19,5 | 30,6 |
50/1 | 31,0 | 51,0 |
(m3/h)
180° semi-spraying angle downwards
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 7,0 | 10,9 |
25/1 | 12,4 | 20,0 |
32/0 | 7,8 | 12,5 |
32/1 | 13,7 | 22,0 |
40/0 | 10,9 | 16,6 |
40/1 | 14,0 | 22,2 |
50/0 | 17,0 | 28,0 |
50/1 | 30,7 | 49,7 |
(m3/h)
270° spraying angle
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 10,0 | 15,8 |
25/1 | 16,0 | 26,2 |
32/0 | 11,4 | 18,6 |
32/1 | 20,0 | 32,6 |
40/0 | 10,4 | 16,2 |
40/1 | 18,0 | 30,0 |
50/0 | 27,7 | 45,0 |
50/1 | 45,0 | 74,3 |
(m3/h)
Stainless steel spray balls
spray ball2000
Static spray heads
The static spray balls are proven aids for cleaning tanks and containers.
Static spray heads are used in the low pressure range between 0.5 bar and 3.0 bar.
For stubborn dirt when rotating spray heads or Rotating cleaning heads are not necessary yet,
it is recommended to use a spray ball with a full spraying angle of 360°.
For less stubborn dirt and grime, it is recommended to use a 180° spray head to spray out the
upper part of the tank or container.
The lower part is the cleaned by the cleaning agent draining out.
If there are installations in a tank that require special cleaning, then it is recommended to install
an extra 180° spray head pointed downwards.
It can be placed directly over or under the installations.
Material
Standard: 1.4571 (V4A)
on request: 1.4435; Hasteloy C22, Aloy 59, Teflon
Connection options
Clip On
Socket connection acc. to ISO 228
Recommended mounting depths
DN | Pressure on the head | Mounting depth |
---|---|---|
8 | 0,5 - 1,0 bar | 100 mm |
10 | 0,5 - 1,5 bar | 300 mm |
15 | 0,5 - 1,5 bar | 300 - 400 mm |
20 | 0,5 - 2,0 bar | 500 mm |
25 | 1,0 - 2,5 bar | 500 - 700 mm |
32 | 1,0 - 2,5 bar | 500 - 700 mm |
40 | 1,0 - 2,5 bar | 500 - 700 mm |
50 | 1,5 - 3,0 bar | 600 - 800 mm |
Spray diameter (in meters)
DN | 360° | 180° up | 180° below | 270° |
---|---|---|---|---|
25/0 | 2,0 - 3,0 m | 2,5 - 3,0 m | 2,0 - 3,0 m | 2,0 - 3,0 m |
25/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
32/0 | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m |
32/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
40/0 | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m | 2,5 - 3,5 m |
40/1 | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m | 3,0 - 4,0 m |
50/0 | 4,0 - 5,0 m | 4,0 - 4,5 m | 4,0 - 4,5 m | 4,0 - 4,5 m |
50/1 | 6,0 m | 6,0 m | 6,0 m | 6,0 m |
Throughput
Perigon spraying 360°
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 11,0 | 17,3 |
25/1 | 17,5 | 28,1 |
32/0 | 13,5 | 22,0 |
32/1 | 21,7 | 35,5 |
40/0 | 11,8 | 19,2 |
40/1 | 22,8 | 36,8 |
50/0 | 28,6 | 47,1 |
50/1 | 49,1 | 78,7 |
(m3/h)
180° semi-spraying angle upwards
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 8,7 | 12,8 |
25/1 | 14,2 | 23,0 |
32/0 | 9,8 | 15,6 |
32/1 | 16,0 | 26,7 |
40/0 | 9,6 | 14,8 |
40/1 | 14,9 | 24,8 |
50/0 | 19,5 | 30,6 |
50/1 | 31,0 | 51,0 |
(m3/h)
180° semi-spraying angle downwards
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 7,0 | 10,9 |
25/1 | 12,4 | 20,0 |
32/0 | 7,8 | 12,5 |
32/1 | 13,7 | 22,0 |
40/0 | 10,9 | 16,6 |
40/1 | 14,0 | 22,2 |
50/0 | 17,0 | 28,0 |
50/1 | 30,7 | 49,7 |
(m3/h)
270° spraying angle
DN | 1 bar | 2,5 bar |
---|---|---|
25/0 | 10,0 | 15,8 |
25/1 | 16,0 | 26,2 |
32/0 | 11,4 | 18,6 |
32/1 | 20,0 | 32,6 |
40/0 | 10,4 | 16,2 |
40/1 | 18,0 | 30,0 |
50/0 | 27,7 | 45,0 |
50/1 | 45,0 | 74,3 |
(m3/h)
This view is not optimized for mobile devices.
You can change back to desktop view.
This view is not optimized for mobile devices.
You can change back to desktop view.