Please note: heco gmbh will discontinue support for Internet Explorer in early 2021.
We recommend Microsoft Edge , which is already installed on Windows 10, also Google Chrome or Mozilla Firefox.
stainless steel
stainless steel
stainless steel
Newsletter
stainless steel
Material
Shipping conditions
Customer- and supplier portal
- Butt welding fittings
- bends
- T- X- Y- pieces
- T- and Y-bends
- reducers
- caps and heads
- collars
- branch saddles
- orbital fittings
- ANSI / ASME
- Industrial valves
- ball valves
- actuators
- drain cocks
- gate valves
- globe valves
- non-return valves
- Y-strainers
- control technology
- Flanges
- welding neck flanges
- threaded flanges
- blind flanges
- plate flanges
- loose plate flanges
- collars
- flange-fittings
- ANSI/ ASME
- other
- Systems
- TEEKAY
- Victaulic
- press fittings
- quick couplings
- clamp connections
- cutting rings
- DIN 11864/ DIN 11853
- railing construction
- Beverage fittings
- unions
- fittings
- pipe clamps
- Tri-Clamp
- valves & cocks
- flange connections
- inspection glasses
- filter & strainers
- spray balls
Diesen Artikel aus der Anfrageliste entfernen?
Ja
Nein
Ok
Ok
Hint
By clicking on this bar you'll return to the table view.
Don't show this hint again!
measures and values
development of stocks
request list
associated articles
T-piece, welded EN 10253-4/ATR.
T-piece, welded EN 10253-4/A
T-piece with identical branch
EN 10253-4 (old DIN 2615-W)
Version |
---|
Type A (identical wall thickness on the welded end and shaped piece body) |
W (welded) - made of welded pipes acc. to EN 10217-7 |
cold reshaped (pressed or drawn) |
solution annealed |
pickled surface |
Material: 1.4307/304L - 1.4541 - 1.4571 - 1.4404/316L |
Certificate acc. to EN 10204/3.1 |
Design pressure
Dimensions (D) | Thickness (s) | Design pressure |
---|---|---|
17,2 mm | 1,6 mm | 62 bar |
21,3 mm | 2,0 mm | 64 bar |
26,9 mm | 2,0 mm | 55 bar |
33,7 mm | 2,0 mm | 40 bar |
42,4 mm | 2,0 mm | 37 bar |
48,3 mm | 2,0 mm | 29 bar |
60,3 mm | 2,0 mm | 21 bar |
76,1 mm | 2,0 mm | 19 bar |
88,9 mm | 2,0 mm | 17 bar |
114,3 mm | 2,0 mm | 12 bar |
114,3 mm | 2,6 mm | 18 bar |
114,3 mm | 2,9 mm | 27 bar |
139,7 mm | 2,6 mm | 14 bar |
168,3 mm | 2,6 mm | 8 bar |
168,3 mm | 3,0 mm | 12 bar |
219,1 mm | 3,0 mm | 8 bar |
273,0 mm | 3,0 mm | 5 bar |
The design pressure was determined for the material 1.4307 for +20°C acc. to EN 10253/ Type A
Tolerances
Limit deviations for wall thickness [s] |
---|
-12 % / +15 % |
Limit deviations for diameter[D] |
---|
+/- 1,0 % or +/- 0,5 mm, the relevant higher value applies (EN tolerance class D2) |
Limit deviations for dimension [l] |
---|
≤ 219,1 = ± 2 mm |
≤ 406,4 = ± 5 mm |
Limit deviations for shaped piece geometry[X] |
---|
X = 1 % of the outside-Ø or 1 mm, the relevant higher value applies |
Product specification
<p><b>T-piece with identical branch</b></p><p><span class="tDescSmall">EN 10253-4 (old DIN 2615-W)</span></p><br><table class="techDescTable"><thead><tr><th><b>Version</b></th></tr> </thead><tbody><tr class="Even"><td>Type A (identical wall thickness on the welded end and shaped piece body)</td></tr><tr class="UnEven"><td>W (welded) - made of welded pipes acc. to EN 10217-7</td></tr><tr class="Even"><td>cold reshaped (pressed or drawn)</td></tr><tr class="UnEven"><td>solution annealed</td></tr><tr class="Even"><td>pickled surface</td></tr><tr class="UnEven"><td>Material: 1.4307/304L - 1.4541 - 1.4571 - 1.4404/316L</td></tr><tr class="Even"><td>Certificate acc. to EN 10204/3.1</td></tr></tbody></table><br><br><p><b>Design pressure</b></p><table class="techDescTable"><thead><tr><th><b>Dimensions (D)</b></th><th><b>Thickness (s)</b></th><th><b>Design pressure</b></th></tr> </thead><tbody><tr class="Even"><td>17,2 mm</td><td>1,6 mm</td><td>62 bar</td></tr><tr class="UnEven"><td>21,3 mm</td><td>2,0 mm</td><td>64 bar</td></tr><tr class="Even"><td>26,9 mm</td><td>2,0 mm</td><td>55 bar</td></tr><tr class="UnEven"><td>33,7 mm</td><td>2,0 mm</td><td>40 bar</td></tr><tr class="Even"><td>42,4 mm</td><td>2,0 mm</td><td>37 bar</td></tr><tr class="UnEven"><td>48,3 mm</td><td>2,0 mm</td><td>29 bar</td></tr><tr class="Even"><td>60,3 mm</td><td>2,0 mm</td><td>21 bar</td></tr><tr class="UnEven"><td>76,1 mm</td><td>2,0 mm</td><td>19 bar</td></tr><tr class="Even"><td>88,9 mm</td><td>2,0 mm</td><td>17 bar</td></tr><tr class="UnEven"><td>114,3 mm</td><td>2,0 mm</td><td>12 bar</td></tr><tr class="Even"><td>114,3 mm</td><td>2,6 mm</td><td>18 bar</td></tr><tr class="UnEven"><td>114,3 mm</td><td>2,9 mm</td><td>27 bar</td></tr><tr class="Even"><td>139,7 mm</td><td>2,6 mm</td><td>14 bar</td></tr><tr class="UnEven"><td>168,3 mm</td><td>2,6 mm</td><td>8 bar</td></tr><tr class="Even"><td>168,3 mm</td><td>3,0 mm</td><td>12 bar</td></tr><tr class="UnEven"><td>219,1 mm</td><td>3,0 mm</td><td>8 bar</td></tr><tr class="Even"><td>273,0 mm</td><td>3,0 mm</td><td>5 bar</td></tr></tbody></table><p><span class="tDescSmall">The design pressure was determined for the material 1.4307 for +20°C acc. to EN 10253/ Type A</span></p><br><br><hr><br><br><p><b>Tolerances</b></p><br><table class="techDescTable"><thead><tr><th><b>Limit deviations for wall thickness [s]</b></th></tr> </thead><tbody><tr class="Even"><td>-12 % / +15 %</td></tr></tbody></table><br><table class="techDescTable"><thead><tr><th><b>Limit deviations for diameter[D]</b></th></tr> </thead><tbody><tr class="Even"><td>+/- 1,0 % or +/- 0,5 mm, the relevant higher value applies (EN tolerance class D2)</td></tr></tbody></table><br><table class="techDescTable"><thead><tr><th><b>Limit deviations for dimension [l]</b></th></tr> </thead><tbody><tr class="Even"><td>≤ 219,1 = ± 2 mm</td></tr><tr class="UnEven"><td>≤ 406,4 = ± 5 mm</td></tr></tbody></table><br><br><table class="techDescTable"><thead><tr><th><b>Limit deviations for shaped piece geometry[X]</b></th></tr> </thead><tbody><tr class="Even"><td>X = 1 % of the outside-Ø or 1 mm, the relevant higher value applies</td></tr></tbody></table>
material
1.4301 >>
1.4307 >>
1.4404 >>
1.4432 >>
1.4435 >>
1.4462 >>
1.4539 >>
1.4541 >>
1.4571 >>
1.4841 >>
304L >>
316 >>
316L >>
You can find the accordings material data sheets in the category Interesting facts
measures and values
stocks and pricing
downloads
CAD
associated articles
T-piece, medium length branch
T-piece seamless EN 10253-4/A
T-piece short, no. 5111
T-piece long, no. 5222
Ask our experts
phone
Chat
We are online!
For technical questions about our products or instructions for handling our website please consult experts in our chat.
offline
Availability
We are online on Monday till Friday from 8am to 5pm.
E-Mail
Business card
Stainless steel T- X- Y- pieces welded DIN EN 10253-4
T-piece, welded EN 10253-4/ATR.
Product specification
T-piece, welded EN 10253-4/A
T-piece with identical branch
EN 10253-4 (old DIN 2615-W)
Version |
---|
Type A (identical wall thickness on the welded end and shaped piece body) |
W (welded) - made of welded pipes acc. to EN 10217-7 |
cold reshaped (pressed or drawn) |
solution annealed |
pickled surface |
Material: 1.4307/304L - 1.4541 - 1.4571 - 1.4404/316L |
Certificate acc. to EN 10204/3.1 |
Design pressure
Dimensions (D) | Thickness (s) | Design pressure |
---|---|---|
17,2 mm | 1,6 mm | 62 bar |
21,3 mm | 2,0 mm | 64 bar |
26,9 mm | 2,0 mm | 55 bar |
33,7 mm | 2,0 mm | 40 bar |
42,4 mm | 2,0 mm | 37 bar |
48,3 mm | 2,0 mm | 29 bar |
60,3 mm | 2,0 mm | 21 bar |
76,1 mm | 2,0 mm | 19 bar |
88,9 mm | 2,0 mm | 17 bar |
114,3 mm | 2,0 mm | 12 bar |
114,3 mm | 2,6 mm | 18 bar |
114,3 mm | 2,9 mm | 27 bar |
139,7 mm | 2,6 mm | 14 bar |
168,3 mm | 2,6 mm | 8 bar |
168,3 mm | 3,0 mm | 12 bar |
219,1 mm | 3,0 mm | 8 bar |
273,0 mm | 3,0 mm | 5 bar |
The design pressure was determined for the material 1.4307 for +20°C acc. to EN 10253/ Type A
Tolerances
Limit deviations for wall thickness [s] |
---|
-12 % / +15 % |
Limit deviations for diameter[D] |
---|
+/- 1,0 % or +/- 0,5 mm, the relevant higher value applies (EN tolerance class D2) |
Limit deviations for dimension [l] |
---|
≤ 219,1 = ± 2 mm |
≤ 406,4 = ± 5 mm |
Limit deviations for shaped piece geometry[X] |
---|
X = 1 % of the outside-Ø or 1 mm, the relevant higher value applies |
measures and values
This view is not optimized for mobile devices.
You can change back to desktop view.
stocks and pricing
This view is not optimized for mobile devices.
You can change back to desktop view.
downloads
Data sheet
T-piece, welded EN 10253-4/A
Stock and price list
Co. MDM d.o.o.
T-piece, welded EN 10253-4/A
The document will be created with lastest data.
CAD
associated articles
T-piece, medium length branch
T-piece seamless EN 10253-4/A
T-piece short, no. 5111
T-piece long, no. 5222
Ask our experts
phone
Chat
We are online!
For technical questions about our products or instructions for handling our website please consult experts in our chat.
offline
Availability
We are online on Monday till Friday from 8am to 5pm.
E-Mail
Business card